You could be experiencing a problem from heat transfer if you are running out of hot water in winter. Your water heater could be heating the water to the proper temperature, but the pipes for the hot water could be surrounded by cold air. The heat from the hot water would quickly transfer to the water pipes, which would cause the hot water to cool down. You should inspect for problems from insulation, water faucets, water leaks and from your water heater:
• Inspect for cold air around pipes.
• Inspect the insulation on pipes.
• Check the thermostat for the water heater.
• Check the temperature of the hot water.
• Inspect the valves for the hot and cold water for faucets.
• Inspect for water leaks from pipes and from the water heater.
Insulation to Control Problems from Heat Transfer
Insulation is important during the winter months because cold air could cause your water pipes to become very cold. The water pipes should be wrapped with insulation, which would protect the pipes from cold air. You should also use some insulation to control the temperature of the air that is in your basement or under your house. With insulation for a crawl space, you can block heat transfer and can prevent your water pipes from becoming extremely cold during the winter.
Insulation for Water Pipes
If your water pipes are not surrounded by cold air, then there would be fewer problems from heat transfer from hot water inside the pipes. After you have blocked extremely cold air from your water pipes, you should carefully wrap insulation around the pipes to ensure that hot water will stay hot inside the pipes. The insulation would protect the temperature of the hot water and would also protect your family from an injury from a hot pipe.
Problems from the Thermostat for a Water Heater
You should use a thermometer to check the temperature of the hot water before you adjust the thermostat setting on the water heater. If the water is not hot enough, then the thermostat or the water heater could be malfunctioning, which would both be dangerous problems. The water heater should be inspected by a plumber because the water heater could continue to heat water and then cause steam to form inside the water heater.
Inspections for Water Leaks from Your Pipes and Your Water Heater
The three high-use places for hot water in a home are the bathtubs, clothes washing machine and dishwasher. If there is not enough hot water coming from a faucet, then there could a water leak, which could be accompanied by low water pressure. We can inspect your plumbing system to find water leaks from pipes and from your water heater.
Shower Water Not Hot Enough in Your Home
If your shower water is not hot enough, then there could a water leak in a pipe for your bathroom. Some water could also be leaking from the water heater. You should check the temperature of the hot water from each faucet to find a water leak. If water is leaking from the water heater, then you would probably notice an odor from mildew near the water heater.
Inspections for the Valves for the Hot and Cold Water for Faucets
If the water heater is functioning properly, then you should check the water faucets. There are control valves for the hot and cold water for the faucets. The hot water could be blocked inside the faucet. You should turn the faucet knob to the highest hot water setting and then check the temperature of the water. If the water is not hot enough, then you may need to open the cutoff valve for the hot water for the faucet.
Precautions for the Thermostat for a Water Heater
You should not change the thermostat setting to an extremely high temperature because the hot water could injure your family. The common complaint “shower water not hot enough” usually indicates that there is a problem with low water pressure inside a pipe for a bathroom. If you are running out of hot water in winter, then you should call American Freedom Plumber in Acworth quickly water heater repair because water damage and a malfunctioning water heater can be a serious problem.